As an Amazon Associate I earn from qualifying purchases.

When upgrading your system, two components hardly ever get your attention. Unfortunately, the mouse and keyboard are as essential as any other one. If you haven’t upgraded for a while, then you should be thinking of doing so now. How to install a wireless keyboard and mouse, as well as mouse, can be both stylish and convenient. After all, no one likes the idea of working his or her way through a labyrinth of cables on the desk. So you need to choose the right gaming mouse and keyboard for your upgrade.

These components go the distance to ensure you don’t have to worry about that nuisance in the future. Besides, they offer an outstanding design that you can show off to your friends too. But there’s a catch, especially in the setup. These components can prove challenging to incorporate into your system. That is where these few tips will prove handy. Here are several ideas to guide you on how to install a wireless keyboard and mouse.

Unboxing

The journey to installing virtually any component starts with unpacking them. These ones will most likely come with some receivers, batteries (in some cases) and software. Most importantly, you can find instructions to guide you in the installation process. If the package doesn’t include some batteries, then consider buying those separately. In case any of these other aspects is missing, you can always contact your retailer or the manufacturer of the product. Also, be sure to confirm with the instructions provided to ascertain availability and worth of everything since products usually differ. It’s important to check everything order before you proceed.

The setup

With the products out of the box, the next step is installing it to your system. Start by flipping it over to remove the battery covers. Put batteries in place, which will help power the component, so it’s essential to ensure that they are new. Be keen on the terminals so you don’t put the batteries the wrong way. The next step is considering an ideal location for the component, especially for best wireless gaming keyboard. Place it where you are certain it would cause problems like tunnel syndrome or tendonitis. You can relocate your current components to create room for the new ones.

Setting up the wireless receiver

This component directly connects to your computer. It then serves to receive the signal from your Bluetooth components and send it to your PC. It is worth noting that some setups call for use of double wireless receivers. In this case, one serves for every component separately – one for the mouse and another for the keyboard. You might run into different requirements depending on the brand you are using.

Nevertheless, you need to consider two aspects. First, the receiver should be about 8 inches from any potential interference. These could be the monitor of your PC or the case, and any other items like a metallic cabinet, lights or computer fan. Another thing to consider is the distance between your mouse or keyboard and the receiver. Keep this at around 8 inches to 6 feet.

Software installation

With virtually any computer hardware, you will find accompanying software. The software includes the drivers for helping the computer’s OS work with the hardware. For the case of these devices, the software could differ relatively depending on the brand. You can go back to its included instructions to get an idea of how to use it best. But in almost all cases, two things stand out in the installation. One of those is to insert the software disc into your computer and let the installation take place. Alternatively, you can always check the instructions if you are not sure what to do. Also, it’s important to have a working keyboard and mouse. This step can be tricky without those components.

Connecting your receiver to the PC

The next step is about the link between your receiver and the computer. You need to start the computer, and then insert the device’s USB at the PC’s USB port. If your PC doesn’t feature this port, you can consider getting a USB hub. This might mean spending more down the road, although the gizmo won’t cost you much anyway. With your connection completed, the machine will begin the configuration of the hardware so your PC can use it. Once complete, you will likely get a message notifying you that the hardware is ready for use. That should mean it’s time to get things going now.

Turning on the keyboard

Now, locate the switch of your keyboard and start it. This can be located in different areas of the component depending on the manufacturer. You will find a “connect” button somewhere on the back, top or its side. If the component uses AA or the AAA batteries, ensure it has new ones. Some keyboards come with an inbuilt, rechargeable battery. If this is the case, then charge it well first before using it. Once you have the keyboard and mouse on, you can proceed to test them.

This can be as simple as typing text on the component. You will get an idea of whether it is well connected and working perfectly. Also, consider moving the mouse around to see if it has any effect on the screen, like cursor movement or such. If any or both of them do not work as expected, then check for any interference to the receiver signal. You may also revisit the troubleshooting instructions to see if there’s something that might be wrong and need fixing. If they both work well, then you can know you got the process right. Besides, with a little change, you can fix any potential problems that could be a challenge.

Out with the old, in with new

Now that your new components are working well, it’s time to substitute the old ones. Probably you still have your former keyboard or mouse still attached to your PC. If that is the case, then this is the right time to unplug them. In case you are not planning to use the old components anymore, you can dispose of them. But make sure to consult any local electronics store about any recycling information. But for Dell-branded ones, you can have an easy time. You will be able to mail them back to the company free of charge. The company will cover the postage, so you don’t have to worry about any further expenses. This proves to be an opportunity you can make the most out of and save the environment too.

As you might have noticed so far, installing your wireless best gaming mice and keyboard isn’t a task for pros. This is something you can do for yourself and get the best results ever. All it takes is to know how to install a wireless keyboard and mouse, and what to consider the most. With this understanding, you can go the DIY way and get the setup perfectly. Start by getting a top-level component, whether it’s the mouse or the keyboard. Then factor in whether you want one with an inbuilt battery or the AAAs one. The market doesn’t have a shortage of any of those. So it’s all about making the choice you want and going for that.

With that worked out, you will have a better start. Then consider keeping your receiver out of interference for fast and reliable performance. Once you have everything set, you can proceed to set up and start using your new components. It’s that easy, and you can forget about the frustrating tangle of cables all over the table. Take your system to new highs with the stylish wireless components. You will love the experience!

Average rating 0 / 5. 0

No votes so far! Be the first to rate this post.